| Item | Description | |
| 145494 | Mounting Adapter for AHM-1 Dri-Air Desiccant Dryer. Adapts from 6" x 6" to 4" x 4" Base |  |
| 145493 | Diffuser Basket for Model AHM-1 Dri-Air Desiccant Dryer. Item #83085 | |
| 145495 | Water After Cooler Kit for Desiccant Type AHM-1, Includes Hoses and Clamps. | |
| 144621 | Low Level Alarm for Desiccant Type AHM-1 thru 4. ** Installed During Fabrication ***** | |
| 147522 | Water After Cooler for Desiccant Type AHM-2 thru 4. Installed in the field, includes Hoses & Needed Clamps. | |
| 111700 | Hopper Dryer Hose Adapter, 2" ID x 3" OD Steel. | |
| 132333 | Hose, Air Ducting, Aluminum, Hopper Dryer, 1-7/8" ID, 25FT Coil, 450F Rated. | |
| 108250 | Dial Thermometer, 1/4" NPT, 2-1/2" Stem, Temp Range 50 to 400 F, For All IMS Hopper Dryers, Twin Bins and V65 Circulators. | |
| 145260 | Desiccant, Activated Alumina, 3/16" Beads, Highest Quality, Lowest Dust Content, 50-Pound Bags. | |
| 119747 | Dew Point Meter/Monitor w/Digital Meter, Model #8072, 230/50/1 Voltage -40 to +15 F w/7' Tube, Inline Air Filter, Desiccant Tube, Built-In Audible Alarm, Silence Switch, Linear Output of 4-20mA, Carrying Case. *-40 to +15 Degree Dew Point Range | |
| 147684 | Insulation, Thermal Sleeve for Dryer Hose 2-1/2" ID x 72" Long With 2" Velcro Straps | |
| 121436 | Insulation, Thermal Sleeve For Dryer Hose 3-1/2" ID, 2FT OAL, With 2" Velcro Straps. | |
| 121433 | Dryer Hose Insulation Sleeve w/Cinch Strap Therma Sleeve, 3-1/2" Diameter, 2FT Section ( 6 PACK ) | |
| 138189 | Filter for Novatec Brand Dryer Model N50-12-966-0477, P/N 07978 . | |
| 133285 | Heater Coil and Rack Assembly for IMS Brand Hot Air Dryer, Model HAD751, 575 Volts, 3PH | |
| 138256 | Thermostat for Novatec Brand Dryer Model N50, 3/8" NPT. P/N 11426 | |
| 107082 | Fuse, Fast-Acting Cartridge Type, 1 Amp Rated at 600V. Midget/5AG Bussmann # KTK-1 , Littelfuse # KLK001 | |
| 147815 | Ball Check, Cincinnati, 4-1/2 OD, BCRS Type, 2"-6 Thd, H-13/HT/NIT | |
| 147816 | Ball Check, Cincinnati, 4-1/2 OD, BCRS Type, 2"-12 Thd, H-13/HT/NIT | |
| 133742 | Thermocouple, 1-12" Variable Depth, Type J Grounded, 3/16" Tip Diameter, 72" Stainless Steel Braided Leads, 2" Split w/Spade Lugs | |
| 121530 | Relay, for Low Level Hopper Alarm 109821, for Low Level Hopper Alarm. | |
| 147255 | Hopper Body For IMS Series Loader Model 200JT | |
| 147257 | Hopper Lid, 3L ,for IMS Series Loaders Model 200 & 200JT | |
| 107436 | Hopper Feed Door Handle w/Knob & Bolts for IMS Granulator Model LP86 | |
| 109866 | Elbow, 90 DEG, 2" DIA, For DC1875-AD, Adjustable Dispersion Cone With 32" DIA Hopper. | |
| 144624 | Low Level Material Light Sensor on Hopper. | |
| 147249 | Silicon Seal, 2.5 for IMS Series Loaders Models 200JT & 300JT for Between Housing and Hopper, Metal to Metal Seal. | |
| 106422 | Light Duty Hopper Magnet, 7-1/2" x 8" Rectangle, 304 Stainless Steel, Ceramic Magnets, 2" Spacing Provides Freer Flow LD Model. | |
| 102276 | Cartridge Heater, 1/4" Dia x 3-1/2" Length, 240 Volt, 250 Watt, Type J Thermocouple, 36" Flex Leads | |
| 108427 | Fuse, Fast-Acting Cartridge Type, 1-1/2 Amp Rated at 600V. Class CC | |
| 108282 | Drying Oven, Bench Type, 6 Tray, 240/60/1, 3.4 Amp, 800 Watts, 518 F Max Temp, Tray Size: 4-1/2"W X 8-1/2"L X 2-1/2"D, Thermostat Control. | |
| 106254 | Temperature Controller, 1/8 Din, For HV65 & V65 Circulators, 32-999 Deg F, w/Dual Prop Triac Outputs, Type J NBS T/C Input, Standard Panel Mount Housing, Barber Coleman #7EM 43110 3000 | |
| 136986 | Thermocouple, 1-8" Variable Depth, Type K Grounded, 1/8" Tip Diameter, 48" Stainless Steel Braided Leads, 2" Split, 1/4" Stripped | |
| 136988 | Thermocouple, 1-8" Variable Depth, Type K Grounded, 1/8" Tip Diameter, 96" Stainless Steel Braided Leads, 2" Split, 1/4" Stripped | |
|