| Item | Description | |
| 132561 | Propylene Glycol, Pro-17, 55 gallon drum, Heat Transfer Fluid, Inhibited Against Acidity and Corrosion, |  |
| 105599 | Lidw/Gasket for 30 Gal Stainless Steel Drum, 16ga Polished 304 SS With Neoprene Gasket | |
| 111876 | Corner Drum Tumbler, 1-1/2 Hp, Belt Drive. Complete with one style 1 Drum Holder for tumbling 30 gallon drums. Includes Lag bolts, Instructions, TEFC motor 208/240/480/60/3. Tumbling speed 18 RPM. Load limit 280 lbs including weight of drum. | |
| 111873 | Corner drum tumbler, 1-1/2 Hp belt drive. Complete with one style 2 drum holder for tumbling 55 gallon drums. Includes Lag bolts, instructions, TEFC motor, 208/240/480/60/3, Tumbling speed 18 RPM. Load limit 280 lbs including weight of drum. | |
| 108427 | Fuse, Fast-Acting Cartridge Type, 1-1/2 Amp Rated at 600V. Class CC | |
| 102276 | Cartridge Heater, 1/4" Dia x 3-1/2" Length, 240 Volt, 250 Watt, Type J Thermocouple, 36" Flex Leads | |
| 107082 | Fuse, Fast-Acting Cartridge Type, 1 Amp Rated at 600V. Midget/5AG Bussmann # KTK-1 , Littelfuse # KLK001 | |
| 145495 | Water After Cooler Kit for Desiccant Type AHM-1, Includes Hoses and Clamps. | |
| 144621 | Low Level Alarm for Desiccant Type AHM-1 thru 4. ** Installed During Fabrication ***** | |
| 147815 | Ball Check, Cincinnati, 4-1/2 OD, BCRS Type, 2"-6 Thd, H-13/HT/NIT | |
| 147816 | Ball Check, Cincinnati, 4-1/2 OD, BCRS Type, 2"-12 Thd, H-13/HT/NIT | |
| 133742 | Thermocouple, 1-12" Variable Depth, Type J Grounded, 3/16" Tip Diameter, 72" Stainless Steel Braided Leads, 2" Split w/Spade Lugs | |
| 136988 | Thermocouple, 1-8" Variable Depth, Type K Grounded, 1/8" Tip Diameter, 96" Stainless Steel Braided Leads, 2" Split, 1/4" Stripped | |
| 111878 | Corner Drum Tumbler, 1-1/2 Hp Belt Drive. Includes lag bolts, instructions, TEFC Motor 208/240/480/60/3. Tumbling speed 18 RPM. Load limit 280 lbs including weight of drum. | |
| 106254 | Temperature Controller, 1/8 Din, For HV65 & V65 Circulators, 32-999 Deg F, w/Dual Prop Triac Outputs, Type J NBS T/C Input, Standard Panel Mount Housing, Barber Coleman #7EM 43110 3000 | |
| 108282 | Drying Oven, Bench Type, 6 Tray, 240/60/1, 3.4 Amp, 800 Watts, 518 F Max Temp, Tray Size: 4-1/2"W X 8-1/2"L X 2-1/2"D, Thermostat Control. | |
| 115827 | Drying Oven, Bench Type, 8 Drawer, 120/60/1, 19 Amps, Max Temp 350F, - Model # DR-350 Drawer Size: 11-3/4" W X 25" L X 2" D, Fully Adj Thermostat Control, Manual Reset Excess Temp Control. | |
| 115823 | Drying Oven, Bench Type, 8 Drawer, 240/60/1, 10 Amps, Max Temp 350F, - Model # DR-350 Drawer Size: 11-3/4" W X 25" L X 2" D, Fully Adj Thermostat Control, Manual Reset Excess Temp Control. | |
| 108288 | Drying Oven, Bench Type, 6 Tray, 120/60/1, 6.7 Amp, 800 Watt, 518 F Max Temp Tray Size: 4-1/2"W X 8-1/2"L X 2-1/2"D Thermostat Control. SEND BLANK TAGS ONLY | |
| 147522 | Water After Cooler for Desiccant Type AHM-2 thru 4. Installed in the field, includes Hoses & Needed Clamps. | |
|