Air
Cooled TrueMold™ Circulator  En Español |
-
Portable – No
water source required
-
Lowers customer’s operating costs by eliminating the expense of water and sewer
-
No need for a water tower
-
Great investment for areas where water is limited or expensive
-
Unique to the market
-
Operating range varies between room temperature and 225° F
-
2 year warranty through IMS
|
 |
| How It
Works... |
 |
-
A – Return water from the mold/process enters back into the circulator
-
B – The water passes through a heat exchanger into the tank
-
C – Tank holds 11 gallons of water and glycol mix
-
D – A powerful fan is activated when cooling
is required. Heated air is removed upwards and away from the operator
-
E – 7.5kW heater is activated when heat
is required to raise the water temperature
-
F – Returns water to mold/process
|
| Price
Vs. Cost |
-
Customer A needs to buy a circulator to produce better parts and have a more
accurate mold temperature.
-
Purchases a water cooled circulator for $2000
-
Uses $100 per month for water and sewer to cool the equipment
-
Water cost for 7 years is $8400
-
$2000 (Initial Cost) + $8400 (Operating Cost) = $10,400 (Total Investment)
-
Customer B buys a IMS Air Cooled TrueMold™ Circulator
-
Price for the circulator is $4600
-
Uses $0 for water and sewer for the equipment
-
$4600 total investment for 7 years
-
After 26 months, the air cooled circulator equals the investment for
the water cooled unit and any use after that point will result in savings put
back into the customers pocket
-
Total Savings for a 7 year investment would be $5800
|
For more specifications and ordering, see:
230/60/3
Volt, Item #122211
460/60/3
Volt, Item #122207 |