|
Ways
to
EXTEND
EQUIPMENT LIFE
IMS also designs, builds and repairs  SCREWS,
END
CAPS
& NOW TIE BARS – INQUIRE!
 View this page in PDF
Get a Barrel Quote Form (PDF)
Ask about Screw & Barrel
Package Deals! |
Does it pay to
overhaul a worn barrel?
YES, if you let IMS do it!
Thanks to our state-of-the-art
equipment
AND our 40+ years of experience, |
| NOBODY can perform higher quality barrel repairs in less time, for less
money |
| Barrel Refurbishing & Resleeving Services, A FULL RANGE OF BARREL ENHANCEMENTS |
+ Barrel Resleeving Steps:
IMS offers relining of barrels up to 8" inside diameter and 180" in length, using D-2, CPM10V, CPM420V, CPM15V or bimetallic liners with the specific grade or trade name you prefer. |
| 1. Cut out old liner |
 |
2. Install liner |
 |
| 3. EDM or mill out feed port |
 |
4. Polish |
 |
5. Inspect
OPTIONAL: Remove broken studs |
|
|
|
|
| Please allow 3 - 4 weeks for delivery / SPECIAL 1 - 2 week RUSH Service available |
- Contact an IMS Engineering & Machining Services Representative for a Return Authorization (RA) Number BEFORE shipping barrels to IMS Company for repair.
- Ship your worn or damaged barrels as Class 85 Machine Parts to: IMS Company, 10373 Stafford Road, Chagrin Falls, OH 44023.
- You will receive an inspection report covering repair cost and delivery dates.
- If you authorize a barrel repair, there is no charge for the inspection.
- If you decide not to repair or replace the barrel, you will be billed for the out-of-pocket costs incurred in handling and inspecting. NOTE: You will save money if your crate is reusable.
|
+ New, OEM Replacement Barrels
If your barrel is beyond feasible repair, remember that IMS stocks some New barrels. If what you need is not in stock, you will be quoted a price and delivery of a replacement barrel. |
+ Custom Designed Barrels
IMS can also quickly design, manufacture and ship custom barrels. A full range of steels, hardening treatments and alloys are available to suit the abrasive/corrosive characteristics of the material to be molded. |
| - AN IMS ALTERNATIVE - |
| R215 Carbide Bound Liners offer the highest degree of wear protection for filler contents exceeding 30% and provide excellent corrosion protection: We start with a solid piece of 4100 series tool steel with a bored ID. CO56 Powder is then placed in the 4100 series barrel, heated-up and spun. This makes the CO56 melt and stick to the inside of the barrel, similar to a sleeve. It is then bored to manufacturer specs and polished. This barrel can be later bored-out and re-sleeved with carbide or tool steel, if necessary. |
 |
|