Ways to
EXTEND
EQUIPMENT LIFE /
CONSERVE (Electricity)



INFRA-KOTE Price and Details
SAFEKOTE 60™ Price and Details
Print this page      E-mail a link to this page
A little air in the wrong place can cause big problems!
Are your heaters burning out too soon? -- Especially your cartridge heaters?
The problem might be an air gap between the heater and the bore it fits into. This problem may be solved by using a heat transfer compound.
Heaters are not always straight and not always perfectly round. A cartridge heater that is slightly smaller than the hole can allow enough of an air gap to insulate the heater from the mold. Instead of heating metal, your heater is trying to heat air hot enough that it can heat the metal. The problem is that air just does not accept enough heat energy and the required temperature may not be reached. This results in your heater working overtime which shortens the life of the heater.
— BEFORE —
Cartridge Heater
in Oversized
Bore Hole
with NO
Heat Transfer
Compound
— AFTER —
IMPROVED
THERMAL
Conductivity
IMS stocks two simple solutions. Our Exclusive INFRA-KOTE (Max. continuous use temperature 350°F) and SAFEKOTE 60™ (Max. continuous use temperature 600°F) Heat Transfer Compounds are great for eliminating air gaps and increasing thermal conductivity. These products are a blend of metal powders in an inert carrier. The metal powder conducts heat far better than air and allows the mold to receive more of the heat it needs to process your plastic.
BENEFITS OF USING IMS HEAT TRANSFER COMPOUNDS
A thin coating of either product on a heater will:
+ Eliminate air pockets PROLONGING HEATER LIFE
+ Ensure more reliable heat transfer CUTTING ENERGY COSTS
+ Improve response time IMPROVING PRODUCTIVITY and PART QUALITY
+ Reduce scale and oxidation MAINTAINING GOOD HEAT TRANSFER
+ Help prevent seizing and galling MAKING HEATER REMOVAL FASTER AND EASIER
Simply apply a thin coating of either product onto each cartridge heater or nozzle body prior to installation
FOR QUESTIONS OR ASSISTANCE IN PRODUCT SELECTION, contact Doug Bartlett
e-mail: dbartlett@www.imscompany.com or phone: 440-543-1615 ext. 136
SAFEKOTE 60™ is a trademark of IMS Company

See these other popular product information pages:
Barrel Insulation Heated Gate Cutters Mold Clamps Screw Tip Selection Chart - Free Flow
Brass Hose Fittings Heat Transfer Compounds Mold Release Sharxx Line™ Granulators
Color Mixing Nozzles Hoist Rings Mold Water-Passage Cleaner SMARTFLOW Products
Dawg Absorbent Products Heater Band Comparison Chart Nozzle Thread Adaptors SPIRAL™ System
Dryers Hot Sleeves™ Heater Bands Nozzles Static Eliminators
Feedscrew Selection Chart Hot Stix™ Cartridge Heaters Plastic Heat Staking Systems Ultrasonic Leak Detector
Gas Assist Molding HTFlex Bands™ Barrel Bands Purgex™ Purging Compounds
Gate Cutter Comparison Chart IMS BRODY-rings® Resin Storage Bins
Gaylord/Drum Covers and Liners Mold Chillers Screw Tip Selection Chart - Ball Check
En Español
Uniones de Latón para Manguera Argollas de Elevación Abrazaderas Forjadas para Molde Liberadores de Molde
Productos SMARTFLOW Moldeo por Gas Asistido Limpiador para Pasajes de Agua de Moldes
Industrial Molding Supplies at www.imscompany.com
About Us | Terms & Conditions Of Sale | Privacy Statement | ISO 9001:2008 | Calculators | Equipment Leasing | Send Us Your Comments | eCONCEPT$™ | Site Map
Toll Free: 1-800-537-5375 USA and Canada FAX: 1-888-288-6900 • Mexico: 001-888-304-1307
Product Technical Support Hotline: 866-467-9001
Quality System Certified
ISO 9001:2008
 10373 Stafford Road • Chagrin Falls, OH 44023-5296 • Phone: (440) 543-1615 • FAX: (440) 543-1069 • E-Mail sales@www.imscompany.com
 A Division of IMS Company © Copyright 2010 IMS Company, all rights reserved worldwide