|
Ways to
RUN FASTER CYCLES:
 Lime Buster XL™ Stock Price List
Lime Buster III™ Stock Price List
|
Just 1/64"
of scale can reduce heat transfer up to 40%! En Español
The unique, IMS Lime Buster III™ Mold Water-Passage
Cleaner will dissolve
and flush away trouble-causing deposits. Heat transfer becomes faster; cycle
times get shorter and electricity use goes down. |
|
THE PROBLEM:
Water circulators give the most efficient mold temperature controls, but water
can leave deposits that insulate the mold from the circulating water; as little
as 1/64" can reduce heat transfer 40%. Full temperature change takes longer –
if it occurs at all. Cycle times and electricity use go up as part quality goes
down.
THE SOLUTION:
The IMS LIME BUSTER III pumps a mild acid and water solution through the
entire mold water system, dissolving and carrying away rust and scale deposits
through a simple oxidation/reduction reaction. Circulating water can then have
direct contact with the metal in the mold, restoring heat transfer. You’ll see
SHORTER CYCLES and BETTER PARTS.
WHY AN ACID AND A NEUTRALIZER?
Non-acid solvents don’t dissolve mineral scale nearly as well as acids. The EPA
requires acids to be neutralized before disposal. Neutralization is very simple
with IMS products. The acid changes color to let you know when it is time to
strengthen or dispose of the solution.
Avoid creeping production loss. Routine use of an IMS LIME BUSTER III helps keep
your molds running at peak performance. |
|
|
| Lime Buster III™ and Lime Buster XL™ are trademarks of IMS Company |