| Model |
RE 89 |
| Cutting Chamber Size |
8" x 9.5" |
| Max. Through Put Rate (lb./hr.) |
150 |
| Base Machine Price (includes soundproofing) |
$10,135 |
|
|
| Rotors |
|
| Staggered |
|
Standard |
| 3 Blade Open |
|
$1,055 |
| Motors |
|
| 5 HP (low speed) |
|
Standard |
| 5 HP |
|
N/C |
| 7.5 HP (low speed) (not available in 208 voltage) |
|
$200 |
| 7.5 HP |
|
$200 |
| 10 HP |
|
$585 |
| 15 HP (not available in 208 voltage) |
|
$950 |
| Controls |
|
| 230 / 460 / 575 Voltage |
|
Standard |
| 208 Voltage |
|
$245 |
| Hoppers |
|
| Standard & Sheet (4" Max. Depth) |
|
$1,415 |
| Standard & Side (4" x 4") |
|
$1,415 |
| KB Conveyor |
|
$1,215 |
| Goblin Style Hopper & Flare |
|
$830 |
| Unloading |
|
| Vacuum Take-Off Tube (1.5" - 2.5") |
|
Standard |
| Bin |
|
$110 |
| Rear Discharge VTO |
|
$95 |
| Special Options |
|
| Base Sound Enclosure (GoldSound) |
|
$1,185 |
| CLS Low Speed Robot Feed Package (Hopper/3rd Bedknife/Gear Motor) |
|
$1,140 |
| Gearbox Speed Reducer (3 HP) |
|
$865 |
| High Level Alarm |
|
$740 |
| High Amp Alarm |
|
$1,750 |
| Hardened Cutting Chamber |
|
$1,025 |
| Preadjustable Knife Fixture (3 Blade) |
|
$1,235 |
| 3rd Bedknife |
|
$310 |
| Stitch Reduced Screen/Cradle in Lieu of Standard |
|
$290 |
| Tungsten Carbide Knives in lieu of Standard (Open Rotor) |
|
$380 |
| Nitrocarburized Screen in lieu of Standard |
|
$100 |
| Incline Conveyor |
|
$4,900 |
| Special Paint |
|
| One Color / Enamel - Hopper Only |
|
$320 |
| Blower Evacuation |
|
| 1.5 HP |
|
$3,450 |
| F7 - AX7.5 Machine Mount Blower Combination |
|
$4,070 |
| Air-Jet Venturi - EVB |
|
$2,330 |
|
|
remove selection |
|
Total:
|
Note: Prices subject to change without notice. The total shown does not include shipping & handling charges, any applicable taxes or additional modifications.
High Level Alarms are placed in the regrind bin or vacuum take off bin to warn if the regrind quantity is becoming too great and the bin needs to be emptied either by hand or by vacuum. Function is to prevent overfilling of the bin.
High Amp Alarm monitors the granulator motor amperage and warns of overfeeding. This is most commonly used with an infeed conveyor. Function is to monitor the granulator and prior to it reaching an over loaded state, will stop the motion of the conveyor automatically until the granulator reaches a state that will allow it to accept more material.
|
For technical assistance
in selecting the right granulator
for your application
and to place your order,
call our
Toll-Free Tech Support Line
at 1-866-467-9001
|