|
Note: Prices subject to change without notice. The total shown does not include shipping & handling charges, any applicable taxes or additional modifications.
ABS Reversing Function. In the event that the granulator should encounter something too rigid to cut it, the rotor will stop and reverse and try to move forward again. This will happen up to three times and will then stop if it cannot cut the item. Additionally it will automatically reverse every six minutes to help stir up the material.
High Level Alarms are placed in the regrind bin or vacuum take off bin to warn if the regrind quantity is becoming too great and the bin needs to be emptied either by hand or by vacuum. Function is to prevent overfilling of the bin.
High Amp Alarm monitors the granulator motor amperage and warns of overfeeding. This is most commonly used with an infeed conveyor. Function is to monitor the granulator and prior to it reaching an over loaded state, will stop the motion of the conveyor automatically until the granulator reaches a state that will allow it to accept more material.
|
For technical assistance
in selecting the right granulator
for your application
and to place your order,
call our
Toll-Free Tech Support Line
at 1-866-467-9001
|